How to

How do I change out a BEP Czone module

Posted by Czone Online on

To change out a BEP Czone module start by: 1. Ensure the Firmware on the replacement device matches the Device to be replaced. This link will explain how to do that: How to determine the firmware version of a Czone module. 2. Turn off power to module. 3. Disconnect all wiring connections then remove the faulty module. 5. If the module is an OI or a MOI remove the fuses from the failed module verify that the fuses are good and fit in the same locations on the new module Warning: Do not put the wrong amp fuse in the...

Read more →

CZone Diagnostics and Trouble shooting

Posted by Czone Online on

Below is a power point on how to trouble shoot the  CZone digital switching  system. Buy Czone Here! 

Read more →

How do I determine if the firmware matches between the Czone replacment module and the module already in the system. ? If it doesn’t match what should I do?

Posted by Czone Online on

The firm ware info can be seen via the “Setting” menu on the Display Interface screen. By selecting the “Network” tab a list of all the modules on the network will be displayed. Select the old device for removal. The version number is the Firmware. All new modules supplied from the factory will have the latest firmware. If the Firmware is incorrect it will need to be matched or updated via the configuration tool. If the user has the configuration tool or is familiar with configuration tool they will be able to update the Czone system them themselves. Otherwise contact...

Read more →